ECONO-LIFT
Econo-Lift ® CPLD Dumbwaiter Systems
Certified to exceed ASME A17.1 & CSA C22.2 #B44
ETL File #5020834 for the USA & Canada
The most economical highest quality dumbwaiter on the market
A floor or wall mounted drive system (motor below or overhead) with a remote controller that includes Honeywell EMI interlocks.
The Econo-Lift® Dumbwaiter from Elevation Innovation incorporates technology for ease of installation, usage, and maintenance. The system includes a UL certified solid state relay logic controller. The electrical components are all pre-wired for ease of installation. Quick connectors are used to tie the included EMI interlocks and level limit switch to the pre-wired call/send stations. An in use indicator is included on each call/send station. Available car here light with upgrade.
Standard Features:
- ETL certified to ASME A17.1 and CSA C22.2 #B44 codes for the USA & Canada
- Operates under 36" kitchen cabinet
- • Finished 9 ply birch cab with dovetailed joints / Powder coat or stainless steel
- Roll up Silver line gate system
- Cab configurations including front/back and 90 degree, three sides available
- VFD (variable frequency drive) Relay logic dumbwaiter controller
- Commercial grade aluminum rail / trolley system
- Safety devices including slack cable, final limits, and trolley brake
- Honeywell EMI interlock door safety devices
- 100 lb or 150 lb capacity included
- 30 fpm rated speed
- Economical, reliable, simple to install cable drive
- Maintenance free 3 phase motor / gear assembly
- 115V 15 amp dumbwaiter operation
- Travel up to 45 feet and 4 stops
- Upper and lower emergency physical stops
- Call / Send stations with in use LED light
- Standard black or upgraded call / send buttons
- Warranty - 5 year Limited Parts
Visit www.eilifts.com for all the information
Econo- Lift ® CPLD Dumbwaiter Systems
Fully ETL Certified to USA - ASME A17.1 Canada CSA C22.2 #B44
Econo- Lift ® 100 lb. and 150 lb. Dumbwaiter Specifications
| DEFLECTION | 100 lb. and 150 lb. dumbwaiter meet all codes per ANSI for cab deflection |
|---|---|
| DESIGN | Floor loading or Counter height |
| CAR | 20” x 20”x 30” (100 lb.) or 24” x 24” x 30” (150 lb.) Custom Size and Shape |
| SIZE | Up to 10 ft cubed |
| MATERIAL | 9 Ply Birch with two coats of clear finish 12 Ply Optional, Powder coated steel or Stainless |
| OPENING | One or two or three sides available |
| CAPACITY | 100 or 150 lbs |
| SPEED | 30 fpm |
| POWER UNIT | 115v (standard), 200v / 230V 50Hz operation available |
| POWER UNIT | Floor mount, Wall mount motor above or below |
| WINDING DRUM | High torque electric motor and completely enclosed worm gear, drums machined to accommodate a single 1/8” 7 x 19 ANSI IPS galvanized steel cable. |
| GUIDE RAIL | Monorail type |
| CONTROLS | Fully automatic allowing car to be sent or called from any floor. Terminal limit switch provided for finals. Car stops automatically at landing levels. Door interlocks for hoist-way doors to prevent operation of the dumbwaiter unless doors are closed and to prevent opening of any door except when the car is at the landing. |
| OPTIONAL | Removable adjustable shelves. |
| EQUIPTMENT | Key lock out options (shut down controller or any call/send station) Fire rated hoist-way doors 20 minute rated and 90 minute rated Stainless steel push buttons with halo LED car here light |
Dumbwaiter Kits Include:
- Guide rail & trolley assembly
- Motor / gear assembly
- • Dumbwaiter cab
- VFD (variable frequency drive) dumb waiter controller
- Call stations with pre-wired harnesses
- Interlocks with pre-wired harnesses
- Limit switches with pre-wired harnesses
- Dumbwaiter Assembly hardware
- Dumbwaiter installation manual